full support gperf gmc/gmp/gcp

@@ -115,6 +115,8 @@ if [ $help = yes ]; then
   --with-utest             build the utest for srs.
   --with-gperf             build srs with gperf tools(no gmc/gmp/gcp, with tcmalloc only).
   --with-gmc               build memory check for srs with gperf tools.
+  --with-gmp               build memory profile for srs with gperf tools.
+  --with-gcp               build cpu profile for srs with gperf tools.
 
   --without-ssl            disable rtmp complex handshake.
   --without-hls            disable hls, rtmp streaming only.
@@ -124,6 +126,8 @@ if [ $help = yes ]; then
   --without-utest          do not build the utest for srs.
   --without-gperf          do not build srs with gperf tools(without tcmalloc and gmc/gmp/gcp).
   --without-gmc            do not build memory check for srs with gperf tools.
+  --without-gmp            do not build memory profile for srs with gperf tools.
+  --without-gcp            do not build cpu profile for srs with gperf tools.
   
   --jobs[=N]               Allow N jobs at once; infinite jobs with no arg.
                            used for make in the configure, for example, to make ffmpeg.
@@ -151,6 +155,14 @@ if [ $SRS_GPERF = NO ]; then
         __check_ok=NO
     fi
 fi
+if [ $SRS_GPERF_MC = YES ]; then
+    if [ $SRS_GPERF_MP = YES ]; then
+        echo "gperf-mc not compatible with gperf-mp, see: ./configure --help";
+        echo "@see: http://google-perftools.googlecode.com/svn/trunk/doc/heap_checker.html";
+        echo "Note that since the heap-checker uses the heap-profiling framework internally, it is not possible to run both the heap-checker and heap profiler at the same time";
+        __check_ok=NO
+    fi
+fi
 # check variable neccessary
 if [ $SRS_SSL = RESERVED ]; then
     echo "you must specifies the ssl, see: ./configure --help";

@@ -67,6 +67,7 @@ SrsUtestSummaryColor="\$(YELLOW)(disabled) "; if [ $SRS_UTEST = YES ]; then SrsU
 SrsGperfSummaryColor="\$(YELLOW)(disabled) "; if [ $SRS_GPERF = YES ]; then SrsGperfSummaryColor="\$(GREEN)"; fi
 SrsGperfMCSummaryColor="\$(YELLOW)(disabled) "; if [ $SRS_GPERF_MC = YES ]; then SrsGperfMCSummaryColor="\$(GREEN)"; fi
 SrsGperfMPSummaryColor="\$(YELLOW)(disabled) "; if [ $SRS_GPERF_MP = YES ]; then SrsGperfMPSummaryColor="\$(GREEN)"; fi
+SrsGperfCPSummaryColor="\$(YELLOW)(disabled) "; if [ $SRS_GPERF_CP = YES ]; then SrsGperfCPSummaryColor="\$(GREEN)"; fi
 
 #####################################################################################
 # makefile
@@ -98,9 +99,14 @@ default: bandwidth librtmp-sample utest
 	@echo -e "          ${SrsGperfMCSummaryColor}gmc: gperf memory check, @see: http://google-perftools.googlecode.com/svn/trunk/doc/heap_checker.html\$(BLACK)"
 	@echo -e "                  ${SrsGperfMCSummaryColor}env PPROF_PATH=./objs/pprof HEAPCHECK=normal ./objs/srs -c conf/srs.conf # start gmc\$(BLACK)"
 	@echo -e "                  ${SrsGperfMCSummaryColor}killall -2 srs # or CTRL+C to stop gmc\$(BLACK)"
-	@echo -e "          ${SrsGperfMPSummaryColor}gmc: gperf memory profile, @see: http://google-perftools.googlecode.com/svn/trunk/doc/heapprofile.html\$(BLACK)"
-	@echo -e "                  ${SrsGperfMPSummaryColor}env PPROF_PATH=./objs/pprof HEAPCHECK=normal ./objs/srs -c conf/srs.conf # start gmc\$(BLACK)"
-	@echo -e "                  ${SrsGperfMPSummaryColor}killall -2 srs # or CTRL+C to stop gmc\$(BLACK)"
+	@echo -e "          ${SrsGperfMPSummaryColor}gmp: gperf memory profile, @see: http://google-perftools.googlecode.com/svn/trunk/doc/heapprofile.html\$(BLACK)"
+	@echo -e "                  ${SrsGperfMPSummaryColor}rm -f gperf.srs.gmp*; ./objs/srs -c conf/srs.conf # start gmp\$(BLACK)"
+	@echo -e "                  ${SrsGperfMPSummaryColor}killall -2 srs # or CTRL+C to stop gmp\$(BLACK)"
+	@echo -e "                  ${SrsGperfMPSummaryColor}./objs/pprof --text objs/srs gperf.srs.gmp* # to analysis memory profile\$(BLACK)"
+	@echo -e "          ${SrsGperfCPSummaryColor}gcp: gperf cpu profile, @see: http://google-perftools.googlecode.com/svn/trunk/doc/cpuprofile.html\$(BLACK)"
+	@echo -e "                  ${SrsGperfCPSummaryColor}rm -f gperf.srs.gcp*; ./objs/srs -c conf/srs.conf # start gcp\$(BLACK)"
+	@echo -e "                  ${SrsGperfCPSummaryColor}killall -2 srs # or CTRL+C to stop gcp\$(BLACK)"
+	@echo -e "                  ${SrsGperfCPSummaryColor}./objs/pprof --text objs/srs gperf.srs.gcp* # to analysis cpu profile\$(BLACK)"
 	@echo -e "\$(GREEN)binaries @see: https://github.com/winlinvip/simple-rtmp-server/wiki/Build\$(BLACK)"
 
 help:

@@ -281,13 +281,16 @@ void SrsServer::on_signal(int signo)
 		return;
 	}
 	
-#ifdef SRS_GPERF_MC
 	if (signo == SIGINT) {
+#ifdef SRS_GPERF_MC
 		srs_trace("gmc is on, main cycle will terminate normally.");
 		signal_gmc_stop = true;
+#else
+		srs_trace("user terminate program");
+		exit(0);
+#endif
 		return;
 	}
-#endif
 
 	// TODO: handle the SIGINT, SIGTERM.
 }

@@ -37,10 +37,10 @@ SrsServer* _srs_server = new SrsServer();
 #include <stdlib.h>
 #include <signal.h>
 
-#ifdef SRS_GPERF_HEAP_PROFILE
+#ifdef SRS_GPERF_MP
 	#include <gperftools/heap-profiler.h>
 #endif
-#ifdef SRS_GPERF_CPU_PROFILE
+#ifdef SRS_GPERF_CP
 	#include <gperftools/profiler.h>
 #endif
 
@@ -54,11 +54,11 @@ int main(int argc, char** argv)
 {
 	int ret = ERROR_SUCCESS;
 
-#ifdef SRS_GPERF_HEAP_PROFILE
-    HeapProfilerStart("gperf.srs");
+#ifdef SRS_GPERF_MP
+    HeapProfilerStart("gperf.srs.gmp");
 #endif
-#ifdef SRS_GPERF_CPU_PROFILE
-    ProfilerStart("gperf.srs.prof");
+#ifdef SRS_GPERF_CP
+    ProfilerStart("gperf.srs.gcp");
 #endif
 	
 	signal(SIGNAL_RELOAD, handler);
@@ -68,6 +68,16 @@ int main(int argc, char** argv)
 		return ret;
 	}
 
+#ifdef SRS_GPERF_MC
+	#ifdef SRS_GPERF_MP
+	srs_error("option --with-gmc confict with --with-gmp, "
+		"@see: http://google-perftools.googlecode.com/svn/trunk/doc/heap_checker.html\n"
+		"Note that since the heap-checker uses the heap-profiling framework internally, "
+		"it is not possible to run both the heap-checker and heap profiler at the same time");
+	return -1;
+	#endif
+#endif
+	
 	if ((ret = _srs_server->initialize()) != ERROR_SUCCESS) {
 		return ret;
 	}